CJMMY - ULTRA HI BASE COAT, 440-1085
- MSDS: CJMMY
- Manufacturer: NATIONAL SANITARY SUPPLY CO
- Product Name: ULTRA HI BASE COAT, 440-1085
- National Stock Number: 8010-00N091538
Product Identification
Product ID:ULTRA HI BASE COAT, 440-1085
MSDS Date:01/09/1995
FSC:8010
NIIN:00N091538
Status Code:A
MSDS Number: CJMMY
Responsible Party
LOS ANGELES, CA 90061
US
Emergency Phone: 800-535-5053
Info Phone: 713-928-5171
Cage: 5R332
Contractor
Telephone: 713-928-5171
Cage: 5R332
Ingredients
ETHOXYLATED NONYLPHENOL
CAS: 9016-45-9
RTECS: AX0247000
POLY(OXY-1,2-ETHANEDIYL), ALPHA-HYDRO-OMEGA-HYDROXY-, ETHER
CAS: 65545-80-4
RTECS: TR1581533
ISOPROPYL ALCOHOL
CAS: 67-63-0
RTECS: NT8050000
OSHA PEL 980 MG/M3;400 PPM
ACGIH TLV: 983 MG/M3;400 PPM
HIGH DENSITY POLYETHYLENE EMULSION
TRIBUTOXYETHYL PHOSPHATE
CAS: 78-51-3
RTECS: KJ9800000
DIETHYLENE GLYCOL MONOETHYL ETHER
CAS: 111-90-0
RTECS: KK8750000
Hazards
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:ACUTE: EYE CONTACT: IRRITANT. HIGH
CONCENTRATIONS OF VAPOR/MIST MAY CAUSE IRRITATION. SKIN CONTACT:
IRRITANT. PROLONGED OR REPEATED CONTACT CAN CAUSE DRYNESS AND
IRRITATION. INHALATION: NO HEALTH EFFE CTS ARE KNOWN TO OCCUR FROM
INHALATION OF THIS PRODUCT UNDER NORMAL USE IN WELL VENTILATED
AREAS. HIGH AIRBORNE CONCENTRATIONS OF MIST OF THIS PRODUCT MAY
IRRITATE THE UPPER RESPIRATORY TRACT. INGESTI ON: MAY CAUSE MARKED
AND PERSISTENT NAUSEA, VOMITING AND ABDOMINAL PAIN. IF VOMITING
OCCURS FOLLOWING INGESTION, ASPIRATION OF VOMIT INTO LUNGS CAN
CAUSE BRONCHOPNEUMONIA OR PULMONARY EDEMA. CHRONIC: NONE KNOWN TO
MFR.
Effects of Overexposure:SEE HEALTH HAZARDS.
First Aid
First Aid:EYES:IMMED FLUSH WITH LARGE QUANTITIES OF RUNNING WATER FOR A
MINIMUM OF 15 MINS. HOLD EYELIDS APART DURING IRRIGATION TO ENSURE
FLUSHING OF ENTIRE SURFACE OF EYE LID WITH WATER. GET MED ATTN IF
IRRIT PERSISTS. SKIN:FLUSH EFFECTED AREA WITHLARGE QUANTITIES OF
RUNNING WATER WHILE REMOVING CONTAM CLOTHES & SHOES. WASH CLTHG
BEFORE REUSE. GET MED ATTN IF IRRIT PERSISTS. INHAL:MOVE PERSON TO
FRESH AIR . IF SYMPTOMS OF RESP DISCOMFORT PERSIST, GET MED ATTN.
INGEST:REQUIRES IMMEDIATE MED MANAGMENT. DRINK MILK/WATER. VOMITING
SHOULD BE INDUCED ONLY ON REC OF MED PERSONNEL NEVER GIVE ANYTHING
BY MOUTH TO AN UNCONSCIOUS PERSON.
Fire Fighting
Flash Point:NON-FLAMMABLE
Lower Limits:N/D
Upper Limits:N/D
Extinguishing Media:CO*2, DRY CHEMICAL, FOAM, WATER FOG.
Fire Fighting Procedures:USE NIOSH APPROVED SCBA AND FULL PROTECTIVE
EQUIPMENT . NORMAL FIRE FIGHTING PROCEDURES MAY BE USED. COOL AND
USE CAUTION WHEN APPROACHING OR HANDLING FIRE-EXPOSED CONTAINERS.
Unusual Fire/Explosion Hazard:NON-FLAMMABLE. CONTAINERS MAY BURST IN
HEAT. HMIS & NFPA RATINGS: HEALTH - 1; FIRE - 0; REACTIVITY - 0.
Accidental Release
Spill Release Procedures:SMALL SPILLS: DILUTE WITH WATER AND PICK UP
WITH MOP AND PAIL. LARGE SPILLS: DIKE AREA TO CONTAIN SPILL. CLEAN
UP USING ABSORBENT MATERIAL. PLACE ALL CONTAMINATED MATERIAL IN A
CLOSED CONTAINER FOR DI SPOSAL.
Handling
Handling and Storage Precautions:STORE IN A COOL DRY PLACE. FOLLOW
LABEL DIRECTION. KEEP OUT OF REACH OF CHILDREN. REPLACE CAP AFTER
USE.
Exposure Controls
Respiratory Protection:NONE REQUIRED UNDER NORMAL USE WITH PROPER
VENTILATION. NIOSH APPROVED RESPIRATOR APPROPRIATE FOR EXPOSURE OF
CONCERN .
Ventilation:ROOM VENTILATION IS ADEQUATE.
Protective Gloves:IMPERVIOUS GLOVES .
Eye Protection:ANSI APPROVED CHEMICAL WORKERS GOGGLES .
Other Protective Equipment:ANSI APPROVED EYE WASH & DELUGE SHOWER .
APPROPRIATE PROTECTIVE EQUIPMENT WHEN GROSS EYE/SKIN CONTACT MAY
OCCUR.
Supplemental Safety and Health
Chemical Properties
Boiling Pt:<100.C, 212.F
Vapor Pres:NOT DETERMINED
Vapor Density:N/D
Spec Gravity:1.02-1.03 (H*2O=1)
pH:8.0 - 9.0
Evaporation Rate & Reference:1 (WATER=1)
Solubility in Water:SOLUBLE
Appearance and Odor:MILKY WHITE; SWEET SCENT.
Percent Volatiles by Volume:80 (APPROX)
Stability
Stability Indicator/Materials to Avoid:YES
STRONG ACIDS, OXIDIZING AGENTS, (I.E., BLEACH).
Stability Condition to Avoid:NONE KNOWN TO NSS ( MANUFACTURER).
Hazardous Decomposition Products:WHEN EXPOSED TO FIRE, PRODUCES NORMAL
PRODUCTS OF COMBUSTION.
Conditions to Avoid Polymerization:WILL NOT OCCUR.
Disposal
Waste Disposal Methods:WASTE FROM DILUTED PRODUCT MAY BE FLUSHED TO
SEWER. UNDILUTED PRODUCT WASTE MUST BE DISPOSED OF I/A/W
FEDERAL/STATE REGULATIONS & LOCAL ORDINANCES. CONTAINER DISPOSAL:
TRIPLE RINSE EMPTY CONTAINER THO ROUGHLY WITH WATER & DISCARD IN
REGULARTRASH COLLECTION IF ALLOWED BY LOCAL, STATE & FEDERAL
REGULAT IONS.
Other Information
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ecology
Ecological:GENERAL: THIS CHEMICAL FORMULATION HAS NOT BEEN TESTED FOR
ENVIRONMENTAL EFFECTS. ALTHOUGH, IN A SPILL SITUATION THIS
FORMULATION MAY BE AESTHETICALLY UNPLEASANT, IT IS WATER INSOLUBLE
& IS NOT EXPECT ED TO SHOW ANY ADVERSE ENVIRONMENTAL EFFECTS.
Transport
Transport Information:HM-181 PROPER SHIPPING NAME (DOT): N/P. HM-181
DESCRIPTION (DOT): N/P. UN NUMBER: N/P. OTHER: N/P.
Regulatory
SARA Title III Information:MATERIALS SUBJECT TO THE REPORTING
REQUIREMENTS UNDER SARA TITLE III SECTION 313 AND 40 CFR PART 372.
SARA TITLE III H&P RATINGS: ACUTE: YES; CHRONIC: NO; FIRE: NO;
PRESSURE RELEASE: NO; REACTIVITY: N O.
Federal Regulatory Information:THIS MSDS WAS PREPARED TO COMPLY WITH
THE OSHA HAZARD COMMUNICATION REGULATION.
State Regulatory Information: